Skip to main content

Breaking a fixed rate home loan: break costs explained

The short answer

A break cost is a fee your lender may charge if you repay, refinance or switch a fixed rate home loan before the fixed term ends. It aims to cover the lender's loss from interest rate changes, so it can be small, large or nil depending on market rates, your balance and the time left.

Last reviewed by Pratik Chauhan · 3 sources

Key facts

  • Exit fees on new home loans were banned from 1 July 2011, but the ban does not apply to break fees on fixed rate loans. (Federal Register of Legislation)
  • Break fees recover the credit provider's loss from early repayment of a fixed rate loan that results from differences in interest rates, and may be calculated by reference to retail rates, wholesale (swap) rates or the lender's cost of funds. (Federal Register of Legislation)
  • Break fees remain subject to the National Credit Code provisions on unconscionable fees and charges (section 78). (Federal Register of Legislation)
  • ASIC notes that switching home loans can involve costs such as LMI, discharge fees and loan arrangement fees that can outweigh a lower rate, and that switching may lengthen the loan term. (Australian Securities and Investments Commission)
  • APRA expects ADIs to assess home loan serviceability using an interest rate buffer of at least 3 percentage points above the loan rate. (Australian Prudential Regulation Authority)

Breaking a fixed rate: how does it work in Australia?

When you fix your rate, the lender agrees to charge that rate for a set period. To do this, it arranges its own funding at a matching fixed cost. If you end the deal early, the lender may lose money on that funding. A break cost (also called a break fee or early repayment adjustment) is how it recovers that loss.

You may be charged a break cost if, during the fixed period, you:

  • refinance to another lender
  • switch to a variable rate or a new fixed rate with the same lender
  • sell the property and repay the loan
  • make extra repayments above the amount your contract allows

Exit fees on new home loans were banned from 1 July 2011. That ban does not cover break fees on fixed rate loans, because break fees are treated as recovering a real loss rather than a penalty for leaving (Explanatory Statement, Federal Register of Legislation).

How are break costs calculated?

There is no single formula across the market. Each lender sets out its method in the loan contract. The rules for consumer credit allow lenders to calculate the fee in several ways, including by reference to their retail rates, wholesale rates known as swap rates, or their own cost of funds. What matters is that the fee relates to the part of the lender's loss that comes from interest rate differences (Explanatory Statement).

In general, three things drive the size of a break cost:

  • How far rates have moved. If rates for the remaining term have fallen since you fixed, the lender loses more and the cost tends to be higher. If rates have risen, the cost may be small or nil.
  • How much you owe. A larger fixed balance usually means a larger cost.
  • How long is left. More time remaining on the fixed term usually means a bigger cost.

Some lenders also add a small administration fee. Break costs are still subject to the National Credit Code rules on unconscionable fees and charges.

Can I get an estimate of my break cost?

Yes. You can ask your lender for a break cost quote at any time. Many lenders provide this by phone, online or in the app. Keep in mind:

  • the figure is an estimate and can change from day to day as wholesale rates move
  • quotes are often only valid for a short time
  • the final amount is set on the day the loan is actually repaid or switched

Ask the lender to confirm in writing which loan accounts or splits the quote covers. If only part of your loan is fixed, the break cost applies to the fixed part. Online break cost calculators use simple formulas and may not match your lender's method.

Should I break my fixed rate to refinance?

Only you can decide, but a simple comparison helps. On one side, add up everything it costs to leave:

  • the break cost quote
  • discharge and settlement fees
  • application or valuation fees on the new loan
  • lenders mortgage insurance, if it applies

On the other side, estimate what you might save on the new loan over the rest of the original fixed period and beyond. ASIC notes that switching costs can outweigh the benefit of a lower rate, and that switching may also lengthen your loan term (ASIC, Switching home loans: tips for refinancing).

It is also worth thinking beyond the numbers. A fixed rate gives certainty about repayments, while a variable loan can offer more flexibility, such as unlimited extra repayments or a full offset account. Some people break a fixed rate because they want those features, not just a lower rate. Others are selling, building or changing their loan structure and have no real choice.

If the fixed term ends soon, waiting may cost less than breaking. If the break cost is small or nil, moving now may be easier. The repayment calculator can help you compare repayments at different rates.

While you're here
Check your borrowing power in 60 seconds

Free, instant, and no details required — see roughly what lenders could approve for you.

Run the calculator

What are the requirements to break a fixed loan?

Breaking the fixed term itself has no special requirements. You ask the lender to repay or switch the loan and agree to pay the break cost. The requirements that matter usually come from the new loan.

If you are refinancing to a new lender, it will assess you as a new borrower. That includes your income, expenses, debts, credit history and the value of your property. The Australian Prudential Regulation Authority (APRA) expects banks to test your ability to repay using a buffer of at least 3 percentage points above the loan rate, as at November 2026 (APRA, APG 223 Residential Mortgage Lending). Check your borrowing capacity before you pay any break cost, since approval for the new loan is not certain.

A good order of events is to get the new loan approved first, then confirm the final break cost, and then settle.

Ways to reduce or avoid a break cost

Some options that may help:

  • Wait for the fixed term to end. There is no break cost once the fixed period finishes.
  • Use your extra repayment allowance. Many fixed loans allow some extra repayments each year without a break cost. Check your contract.
  • Ask your current lender to reprice. Some lenders may offer a different deal, though switching within the same lender can still trigger a break cost.
  • Split the loan next time. Fixing only part of the loan leaves a variable part you can pay down or move more freely.
  • Check the timing. Because quotes change, the cost on one day may differ from another.

If you think a break cost was not worked out correctly or was not properly disclosed, you can first complain to your lender. If that does not resolve it, you can take the complaint to the Australian Financial Complaints Authority (AFCA), a free external dispute service.

What varies by lender

Lender policy differs and can change. Things that vary include:

  • the formula used to work out the break cost
  • whether an administration fee is added
  • how much you can repay early each year without a break cost
  • whether switching to a new fixed rate with the same lender triggers a break cost
  • how long a quote is valid and how you request one
  • whether an offset account is available on fixed loans

Your loan contract sets out the method that applies to you. A broker can compare current options and confirm what applies to your situation.

Next steps

Find your fixed rate end date, ask your lender for a break cost quote and gather your recent loan statements. Then read more about refinancing loans. When you are ready, you can start an application and a broker will talk through your options. This page is general information only and does not consider your personal circumstances.

Frequently asked questions

How are break costs calculated?

Each lender sets out its own method in the loan contract. In general, the cost depends on how much interest rates have moved since you fixed, how much you owe and how long is left on the fixed term.

Can I get an estimate of my break cost?

Yes. You can ask your lender for a quote. It is an estimate that can change daily as wholesale rates move, and the final amount is set when the loan is repaid or switched.

Should I break my fixed rate to refinance?

It depends on whether the savings from the new loan are larger than the break cost and other switching fees. If the fixed term ends soon, waiting may cost less. Comparing the total costs side by side helps.

Are break costs the same as exit fees?

No. Exit fees on new home loans were banned from 1 July 2011, but break fees on fixed rate loans are still allowed because they recover a loss linked to interest rate changes.

Can a break cost be zero?

Yes. If interest rates for the remaining fixed term have risen since you fixed, the lender may have little or no loss, so the break cost can be small or nil. Some lenders still charge an administration fee.

Keep exploring

Loan options
Home Loans: how it works with a broker
Run your numbers
Check borrowing power
Foreign buyer ban on established homes extended to 30 June 2029

Yes, the ban on foreign persons buying established homes in Australia has been extended to 30 June 2029, instead of ending on 31 March 2027. It started on 1 April 2025 and covers temporary residents, including many 482 and 491 visa holders. Foreign buyers can still apply for approval to buy new homes, off-the-plan homes or vacant land.

Government housing scheme updates (5% Deposit, Help to Buy, state grants)

As at November 2026, there has been no new change to the 5% Deposit Scheme since its October 2025 expansion, while Help to Buy income limits rose on 1 July 2026 to $103,000 for singles, according to the official scheme website. This page tracks scheme changes and links each one to its official source.

Lender rate change tracker (who moved, by how much, effective date)

After the Reserve Bank's November 2026 increase, the big four banks and ING said they will lift variable home loan rates by 0.25 percentage points from 13 November 2026, and Macquarie from 19 November 2026. This tracker lists who has moved, by how much and when, using each lender's own announcement.

RBA cash rate decision tracker (updated each meeting)

Yes. On 3 November 2026 the Reserve Bank lifted the cash rate target by 25 basis points to 4.85%, its fifth increase in 2026, according to the RBA's statement. Lenders set their own home loan rates, so changes for borrowers depend on each lender. The next meeting is 7–8 December 2026.

The 3% serviceability buffer explained

The serviceability buffer is an extra margin banks add to a home loan's rate when checking if you can afford it. As at November 2026, APRA expects banks to use at least 3 percentage points, so your repayments are tested at a higher rate than you will actually pay.

How credit cards, BNPL and car loans reduce borrowing power

Credit cards, buy now pay later accounts and car loans all reduce how much you can borrow for a home. Lenders count the repayments on these debts as costs, and many assess a credit card on its full limit, even if you pay it off each month. Reducing limits and clearing small debts before applying may help.

Sources

  1. Explanatory Statement: National Consumer Credit Protection Amendment Regulations 2011 (No. 3) — Federal Register of Legislation, accessed 8 November 2026
  2. Switching home loans? ASIC tips for refinancing — Australian Securities and Investments Commission, accessed 8 November 2026
  3. APG 223 Residential Mortgage Lending — Australian Prudential Regulation Authority, accessed 8 November 2026
Who wrote and checked this

Written by the MakeMyLoan editorial team and reviewed by Pratik Chauhan, Founder & Finance Broker — facts last checked . We check every figure against official sources and update pages when rules change.

MakeMyLoan Pty Ltd is an authorised credit representative (Credit Representative Number 548289) of Australian Finance Group Ltd, Australian Credit Licence 389087. See our credit guide.

This page is general information only and doesn't consider your objectives, financial situation or needs. It isn't credit advice, and lending criteria, rates, fees and government rules change. Before acting, speak with a MakeMyLoan broker, who will assess your circumstances and give you a credit guide before providing credit assistance.

Want an answer for your exact situation?

A MakeMyLoan broker can check which lenders fit your circumstances. Enquiring is free and doesn't involve a credit check.