The 3% serviceability buffer explained
The serviceability buffer is an extra margin banks add to a home loan's rate when checking if you can afford it. As at November 2026, APRA expects banks to use at least 3 percentage points, so your repayments are tested at a higher rate than you will actually pay.
Last reviewed
Key facts
- On 28 May 2026 APRA kept the mortgage serviceability buffer at 3 percentage points and left its other macroprudential settings unchanged. (APRA)
- APRA's 6 October 2021 letter raised the expected serviceability buffer from at least 2.5 per cent to at least 3.0 percentage points over the loan rate. (APRA)
- From 1 February 2026 ADIs can lend up to 20% of new owner-occupier and, separately, new investor lending at a debt-to-income ratio of six or more; the 3% buffer is unchanged; new-dwelling and owner-occupier bridging loans are excluded. (APRA)
- The RBA says most non-bank lending is outside APRA's prudential perimeter, and after October 2021 some non-banks adopted the 3 percentage point buffer while others used their own serviceability criteria. (Reserve Bank of Australia)
What is the serviceability buffer?
When a lender checks whether you can afford a home loan, it doesn't just use the rate you will be charged. It adds a margin on top and checks that you could still make the repayments at that higher rate. That margin is called the serviceability buffer.
The buffer is set as an expectation by APRA, the Australian Prudential Regulation Authority, which oversees banks and other authorised deposit-taking institutions (ADIs). APRA's 6 October 2021 letter to ADIs lifted the expected buffer from at least 2.5% to at least 3 percentage points above the loan's interest rate. APRA said it wanted a cushion against future rate rises and against changes in a borrower's income or costs.
As at November 2026, the buffer is still 3 percentage points. In its 28 May 2026 update, APRA kept the setting unchanged, saying it helps recent borrowers keep up their repayments if expenses or rates rise.
How does the buffer work in Australia?
The buffer is applied during the serviceability test, which is the part of the application where the lender compares your income with your costs and debts. A simple way to picture it: - The lender takes the rate it would charge on your loan - It adds the buffer to get an assessment rate - It works out the repayment at that assessment rate - It checks whether your income covers that repayment plus your living costs and other debts
For example, as at November 2026, with APRA's 3 percentage point buffer, a loan priced at 6% would be assessed as if it were 9%. This example is only to show how the maths works, and it isn't a quote or an offer.
Many lenders also use a minimum floor assessment rate. If the loan rate plus the buffer comes out below that floor, the floor is used instead. Floors are set by each lender, so they vary by lender.
Why can I borrow less than the repayments I can afford?
This is one of the most common surprises for borrowers. You may know you could comfortably pay the repayments at today's rate, yet the lender offers less than you expected. The buffer is often the reason.
Because your repayments are tested at a higher rate, the maximum loan that passes the test is smaller. Other parts of the assessment push in the same direction: - Lenders often use a living expense figure that is the higher of your stated spending or a benchmark - Credit card limits may be counted as if fully drawn, even if you pay them off each month - Some income types, such as overtime, bonuses or rental income, may only be partly counted - Existing debts, such as car loans and HECS-HELP, reduce what is left over
You can get a rough idea of how these factors affect you with our borrowing capacity calculator, and see the actual repayments on a given amount with the repayment calculator. A lender's own result may differ.
Is APRA lowering the buffer?
Not as at November 2026. APRA reviews its macroprudential settings regularly. At its 28 May 2026 review, it held the buffer at 3 percentage points and kept its other settings unchanged, pointing to an uncertain outlook and pressure on household and business cash flows.
APRA has added another tool alongside the buffer. In a 27 November 2025 announcement, it said that from 1 February 2026, ADIs can lend up to 20% of new owner-occupier lending, and separately up to 20% of new investor lending, to borrowers whose debt is six or more times their income. The same release confirmed the buffer was staying at 3%. Loans to buy or build new homes and owner-occupier bridging loans are excluded from the debt-to-income limit.
APRA can change these settings at any time, and has said it will adjust them if conditions change. Any future change would be announced by APRA, and lenders would then update their own policies.
Free, instant, and no details required — see roughly what lenders could approve for you.
Do non-banks use the same buffer?
Not necessarily. Non-bank lenders are lenders that don't take deposits, so they aren't ADIs. APRA's buffer expectation is aimed at ADIs.
A Reserve Bank bulletin on non-bank lending notes that most non-bank lending sits outside APRA's prudential oversight. It found that after APRA raised the buffer in October 2021, some non-banks also moved to 3%, while others kept using their own serviceability settings. The bulletin also explains that APRA has reserve powers to extend some rules to non-banks if their lending is adding to financial instability.
Non-bank lenders still need to follow Australia's consumer credit laws, including responsible lending rules, when lending to people for personal or home purposes. So a non-bank lender may assess your application differently, but it still must check that the loan isn't unsuitable. A different buffer can mean a different borrowing amount, and often a different price.
What can affect your result under the buffer?
The buffer itself is fixed by the lender, but the rest of your application isn't. Several parts of your own situation feed into the test, and changes to them can shift the outcome. These are general points, not a plan for any one person.
- Credit card limits: because many lenders count the full limit, a lower limit or a closed card that you no longer use can free up capacity.
- Other debts: paying down or clearing a car loan or personal loan reduces the repayments that the lender has to allow for.
- Loan term: a longer term lowers the assessed repayment, although it means paying more interest over the life of the loan.
- Income evidence: clear, consistent records make it easier for a lender to count more of your income, especially for casual, self-employed or bonus income.
- Living costs: a realistic budget helps, since lenders compare your stated spending with their own benchmarks.
Each of these has trade-offs, and the right mix depends on your goals. A broker can show how different lenders may treat each point, but any decision about your money is yours to make.
What varies by lender
While the 3 percentage point buffer is a common starting point for banks, the full assessment varies by lender and can change. Things that commonly differ include: - The buffer itself, especially among non-bank lenders - Floor assessment rates - How living expenses are assessed - How much of each income type is counted - How existing debts and credit limits are treated - Appetite for high debt-to-income loans, given APRA's limits
This is why two lenders can give very different borrowing amounts for the same person. We don't publish individual lender policies here. A broker can compare how lenders may assess your situation and will confirm what applies when you speak with us.
Next steps
If you want to understand how the buffer affects your own borrowing, it helps to gather your payslips, a list of your debts and credit limits, and an honest picture of your monthly spending. You can read more about loan options on our home loans page.
When you are ready, you can start an application and a MakeMyLoan broker will be in touch. This guide is general information only and doesn't take your personal situation into account.
Next steps
Frequently asked questions
What is the serviceability buffer?
It is a margin lenders add to a home loan's rate when testing whether you can afford it. As at November 2026, APRA expects banks to use at least 3 percentage points above the loan rate.
Why can I borrow less than the repayments I can afford?
Lenders test repayments at the higher buffered rate, and may also use benchmark living costs, count card limits as fully drawn and shade some income. Together these lower the maximum loan.
Is APRA lowering the buffer?
No change had been announced as at November 2026. APRA kept the buffer at 3 percentage points at its May 2026 review and can change it if conditions change.
Do non-banks use the same buffer?
Not always. Non-bank lenders aren't ADIs, so APRA's buffer expectation isn't aimed at them. Some use a similar buffer and others use their own settings, but they still follow responsible lending laws.
Sources
- APRA maintains current macroprudential policy settings in highly uncertain environment — APRA, accessed 7 November 2026
- APRA to limit high debt-to-income home loans to constrain riskier lending — APRA, accessed 7 November 2026
- Strengthening residential mortgage lending assessments — APRA, accessed 7 November 2026
- Non-bank Lending in Australia and the Implications for Financial Stability — Reserve Bank of Australia, accessed 7 November 2026
Written by the MakeMyLoan editorial team and reviewed by Pratik Chauhan, Founder & Finance Broker — facts last checked . We check every figure against official sources and update pages when rules change.
MakeMyLoan Pty Ltd is an authorised credit representative (Credit Representative Number 548289) of Australian Finance Group Ltd, Australian Credit Licence 389087. See our credit guide.
This article is general information only and doesn't consider your personal objectives, financial situation or needs — it isn't personal credit advice, and lending criteria, rates, fees and government schemes change. Before acting, speak with a MakeMyLoan broker who will assess your circumstances and provide a credit guide before any credit assistance is given.